EASA Implementing Rules and Specialized Trainings

EASA Rules Courses

Date Course Duration Attendant
15-26.09.2017 EASA Part-M Initial 2 days 10-28 student
15-26.09.2017 EASA Part-M Advanced (with workshop included) 3 days 10-28 student
15-26.09.2017 EASA Part-145 Initial 2 days 10-28 student
15-26.09.2017 EASA Part-145 Advanced (with workshop included) 3 days 10-28 student
15-26.09.2017 EASA Part-66/147 Initial 2 days 10-28 student
15-26.09.2017 EASA Part-66/147 Advanced (with workshop included) 3 days 10-28 student
15-26.09.2017 EASA Maintenance Programme 2 days 10-28 student
15-26.09.2017 EASA Reliability Programme 1 day 10-28 student
15-26.09.2017 Airworthiness Review 1 day 10-28 student
15-26.09.2017 Continuing Airworthiness Management Organisation - CAMO 1 day 10-28 student
15-26.09.2017 CAMO Advanced + Workshop 2 days 10-28 student
15-26.09.2017 Quality Auditing & Root Cause Analysis 2 days 10-28 student
15-26.09.2017 Quality System 1 day 10-28 student
15-26.09.2017 Safety Management System - SMS 2 days 10-28 student
15-26.09.2017 SMS for Postholders & Managers 2 days 10-28 student
15-26.09.2017 Electrical Wiring Interconnection System (EWIS) 3 days 10-28 student
15-26.09.2017 Fuel Tank Safety 2 days 10-28 student
15-26.09.2017 Engine Borescope Inspection 3 days 10-28 student
15-26.09.2017 Train the Trainer – Professional Skills for Instructors 40 soru 10-28 student
15-26.09.2017 Aircraft English 10 days 10-28 student

Course Description:

The EASA Part M course is a two-day training focusing on the requirements for commercial air transport. This course is developed in order provide students with a full understanding of the operator’s responsibilities, contracted arrangements, Subpart B, C & G responsibilities and Subpart I ARC arrangements.

Course Objectives:

After completing the Type Training B1/B2 maintenance course, the participant will be able to:

Learning objectives:

After completion of this course you will: know what EASA Part M includes understand and be able to explain what Part M subparts B, C and G represents be able to make a connection between the content of the training and management tasks of a CAMO know what a CAME is and where it is used for have the fundamental knowledge to understand what is required for obtaining a CAMO approval

Regulatory requirement compliance:

This training course includes the following amendments to the regulation, AMC and GM: Commission Regulation (EU) No 1321/2014 including amendments (EU) 2015/1088 and (EU) 2015/1536 Acceptable Means of Compliance and Guidance Material to Annex I (Part M) to Commission Regulation (EU) No 1321/2014 Issue 2 — Amendment 1

Prerequisites:

A general understanding and some background knowledge of the operation of EASA Part M Subpart G, F and Part 145 approved organizations.

Course Topics:

  • Module 1: Introduction to PART M
  • Module 2: Subpart B Responsibilities
  • Module 3: Subpart C Continuing Airworthiness
  • Module 4: Subpart G Continuing Airworthiness Management
  • Module 5: Subpart I Airworthiness Review Certificate
  • Module 6: CAMO and CAME

Course Duration:

The course programme shall consist of three days and starts at 9.00 till 16.00. Additional breaks may be taken as needed. The course programme will be as follows:

Day 1:

  • 09.00 – 10.30 Start Part 1 and 2
  • 10.30 – 10.45 Coffee Break
  • 10.45 – 12.00 Continue Part 2
  • 12.00 – 12.45 Lunch Break
  • 12.45 – 14.30 Start Part 3
  • 14.30 – 14.45 Coffee Break
  • 14.45 – 16.00 Continue Part 3

Day 2:

  • 09.00 – 10.30 Start Part 4
  • 10.30 – 10.45 Coffee Break
  • 10.45 – 12.00 Continue Part 5
  • 12.00 – 12.45 Lunch Break
  • 12.45 – 14.30 Start Part 6
  • 14.30 – 14.45 Coffee Break
  • 14.45 – 16.00 Examination

Course Description:

This course is developed with EASA Part 66 Appendix I Basic Knowledge requirements 10.1 and 10.3 of Module 10 Aviation Legislation and EASA Part 145.A.20 till 145.A.95, including AMC and GM, as a reference.

This EASA Part 145 training course is not only intended for Technicians and Certifying Staff, but also for other functions directly or indirectly related to maintenance activities. SİNERJİ recommends managers to participate in this classroom course as well, as they are required to be aware of the Part 145 requirements and the changes to the requirements.

Course Objectives:

This course is created with the intention get intorduced, or to refresh the basic knowledge of the aviation maintenance legislation required for Part 66 Category A, B1, B2 and C licensed Technicians, Certifying Staff and Supportive personnel. Besides introduction/refreshing the basic knowledge, relevant changes to the requirements are addressed as well.

Learning objectives:

This course will provide you with the following: SKILLS: understand the role of ICAO and the relation with EASA understand the structure and principles of the EASA parts understand part 145 requirements and the relevant recent changes ATTITUDE: being aware of the importance of the correct implementation Part 145 requirements having the willingness to report any none conformances or violations related to Part 145 requirements being able to understand the relation between the Part 145 requirements and the organisational maintenance procedures and practices

Regulatory requirement compliance:

This training course includes the following amendments to the regulation, AMC and GM: Commission Regulation (EU) No 1321/2014 including amendments (EU) 2015/1088 and (EU) 2015/1536 Acceptable Means of Compliance and Guidance Material to Annex II (Part 145) to Commission Regulation (EU) No 1321/2014 Issue 2 — Amendment 1

Prerequisites:

A general understanding and some background knowledge of the operation of EASA Part 145 approved Maintenance Organizations.

Course Topics:

PART I HISTORY AND BACKGROUND

  • History International Aviation Requirements
  • European Aviation Safety Agency (EASA)
  • Structure of EASA requirements

PART II EASA PART 145 APPROVAL

  • 145.A.10 Scope
  • 145.A.15 Application
  • 145.A.20 Terms
  • 145.A.90 Continued Validity
  • 145.A.95 Findings

PART III RESOURSES

  • 145.A.25.Facility Requirements
  • 145.A.30 Personnel Requirements
  • 145.A.35 Certifying Staff and Support staff
  • 145.A.40 Equipment. tools and materials
  • 145.A.45 Maintenance data
  • 145.A.47 Production Planning

PART IV Maintenance Requirements

  • 145.A.42 Acceptance of components
  • 145.A.50 Certification of maintenance
  • 145.A.55 Maintenance Records

PART V PROCEDURES AND POLICIES

  • 145.A.60 Occurrence reporting
  • 145.A.65 .Safety and quality policy, maintenance procedures and quality system
  • 145.A.70 Maintenance organisation exposition

PART VI ORGANISATION

  • 145.A.75 Privileges of the organisation
  • 145.A.80 Limitations on the organisation
  • 145.A.85 Changes to the organisation

Course Duration:

The course programme shall consist of three days and starts at 9.00 till 16.00. Additional breaks may be taken as needed. The course programme will be as follows:

Day 1:

  • 09.00 – 10.30 Start Part 1 and 2
  • 10.30 – 10.45 Coffee Break
  • 10.45 – 12.00 Continue Part 2
  • 12.00 – 12.45 Lunch Break
  • 12.45 – 14.30 Start Part 3
  • 14.30 – 14.45 Coffee Break
  • 14.45 – 16.00 Continue Part 3

Day 2:

  • 09.00 – 10.30 Start Part 4
  • 10.30 – 10.45 Coffee Break
  • 10.45 – 12.00 Continue Part 5
  • 12.00 – 12.45 Lunch Break
  • 12.45 – 14.30 Start Part 6
  • 14.30 – 14.45 Coffee Break
  • 14.45 – 16.00 Examination

Contact

  • Address: Sefaköy Halkalı Caddesi 1. Özbey Sokak No:3 Küçükçekmece-İSTANBUL

  • Pbx: +90 212 541 9466
  • Email: mail@sinerjiaviation.com

Social Media